Choosing & buying
How to read an FVKD product page before you buy
Every FVKD product page carries the same handful of facts in the same places. Once you know where they sit and what each one actually tells you, comparing two products takes about thirty seconds instead of ten minutes.
Quick answer
Check six things: the size in grams, which cannabinoid, the strain type printed on the box, the pack size and per-unit price, the batch number, and the COA link. Everything else on the page is description.
Why product pages are harder to read than they look
Hemp product pages carry two kinds of information at once. Some of it is measurable and verifiable: fill weight, cannabinoid content, batch number, what a lab found. Some of it is description: flavour notes, how a line is positioned, what the producer chose to call a strain.
Both have a place, but only the first kind lets you compare two products honestly. A page that leads with adjectives and buries the grams is harder to shop from than one that puts the numbers where you can find them.
We put the verifiable facts in a fixed place on every product page, in the same order, so you can learn the layout once. This post walks through that layout field by field.
Size in grams: the number that sets the value
The headline weight is the fill weight — how much extract is in the device — not the weight of the device itself. A 3.5g disposable holds 3.5 grams of extract. A 1.5g holds 1.5 grams. The hardware around it is not counted.
This matters because two products at similar prices are not similar value if one holds more than twice as much. Fill weight is the denominator in every price comparison worth making.
Pre-rolls work differently. They are listed by the weight of each roll and how many are in the pack, so a 2g pre-roll sold in a two-pack is four grams of product in total. Read both numbers, not just the one in the product name.
Syringes are listed by the weight of extract in the syringe. There is no device to discount, so the number is the product.
Which cannabinoid, and why it is not interchangeable
FVKD lines split mainly between THCA and THC-P. The product name says which one, and the specification table repeats it. They are different compounds, they are measured separately on a lab report, and one is not a substitute for the other.
Some products list both because both are present. Where that happens, the specification table shows the split rather than a single combined figure, because a combined figure would hide the thing you are trying to see.
We do not tell you what either compound will do for you. That is not something a retailer should be claiming, and it is not something a product page can honestly answer. What the page can tell you is exactly what is in the device and what the lab measured. Our THCA vs THC-P guide covers the chemistry difference in detail.
Strain type: what the label denotes
Indica, sativa or hybrid is what FVKD prints on the packaging. We reproduce it because it is a fact about the product you will receive, and because people shop by it.
It is worth being precise about what it is. These are labelling conventions used across the industry, applied by the producer. They are not measured properties, they are not standardised between brands, and the same strain name can carry a different label at a different company.
So treat it as a sorting tool, not a promise. If you have bought a particular strain type before and got on with it, the label helps you find similar products. It does not tell you how a specific device will behave.
We do not make effects claims anywhere on this site, including here. If you want to browse by label, the indica, sativa and hybrid pages group products the way the boxes are marked.
Pack size and the per-unit price
Most products are sold as a single unit or in a multi-pack. The buy box shows the price of the pack you have selected and, underneath it, the price per unit.
The per-unit figure is the one to compare. A five-pack is only good value if the per-unit price is meaningfully lower than the single, and that is not always the case across lines.
Both figures update from live pricing rather than being typed into the page, so what you see is current. If a price changes, the comparison changes with it. Nothing on the page is a stale number from the day it was written.
Where a pack is the best value in a range, the pack picker marks it. That marker is arithmetic, not a recommendation.
Batch number and the certificate of analysis
This is the part most people skip, and it is the part that makes everything else checkable.
Every product links its certificate of analysis — the lab report for the batch. The batch or lot number printed on your packaging should match the batch named on the report. If it does not, the report describes a different production run, which is not the same as describing yours.
A COA that you cannot tie to the item in your hand is decoration. One you can tie to it is evidence.
Our lab results page lists reports by product line, and every product page links the report directly. If a report is missing, there is a request link on the page and we chase it with FVKD.
Stock status and what "sold out" actually means
Stock comes from the live catalogue, so a product marked in stock was in stock when the page loaded. Sold out means we cannot currently supply that exact item — that specific strain, in that line, at that size.
It rarely means the strain is gone entirely. The same strain often appears in another line or another size, and the product page lists those alternatives under “in other lines” precisely so you do not have to search for them.
We do not take orders for items we cannot ship. If something is sold out, it cannot be added to the cart.
What the description is for
Below the facts sits the written description: the strain, the extract, the device, the flavour language. All of it is written by us, from the product data. None of it is copied from the brand site or anywhere else.
That means our flavour words are our own reading, not FVKD’s marketing. Treat them as one opinion. The specification table and the lab report are the parts that are not opinion.
If you want to know how we choose what to stock and what we can and cannot speak for, our about page sets out the relationship plainly: we are a retailer of FVKD Exotics products, not the brand.
A thirty-second routine
Once you know the layout, checking a product is quick. Read the fill weight. Read which cannabinoid. Glance at the strain type if you shop by it. Compare the per-unit price rather than the pack price. Open the COA and check the batch matches. Then read the description if you still want to.
Do that on two products side by side and the better buy is usually obvious within a minute — and you will have verified it rather than taken our word for it.
FAQ
Questions, answered
What does the gram number on an FVKD product mean?
It is the weight of extract in the device, not the weight of the device itself. A 3.5g disposable contains 3.5 grams of extract.
Why do two products with the same strain name cost different amounts?
Because the line, the extraction method and the fill size differ. The same strain appears across several FVKD lines and each is made differently. Compare the per-unit price rather than the pack price.
Where do I find the batch number on my product?
It is printed on the packaging, usually near the base of the box or on the sticker. Match it against the batch named on the linked COA.
What should I do if a product has no COA linked?
Use the request link on the product page, or contact us with the product name and batch number. We ask FVKD for the report and add it to the lab results page once we have it.
Does indica or sativa on the box tell me how it will feel?
No. It is a labelling convention applied by the producer, not a measured property, and we make no claims about effects. Use it to sort products, not to predict them.
Are the prices on the page current?
Yes. Prices and the per-unit figures are rendered live from our catalogue rather than typed into the page, so they update when the price does.
